Manage tooling projects during the New Product Introduction (NPI) stage.Organize and lead the NPI team to ensure timely completion with high-quality results.Lead tooling project engineers in effective debugging and ensure mold issues are resolved promptly through proper trial reporting.Maintain close coordination between Tooling and Molding teams to prioritize tasks and ensure production aligns with the plan.Ensure all documentation is properly controlled and complies with system requirements.Promote a strong sense of “Production Readiness” across the team.Lead the Tooling Project team in delivering high-standard tooling that meets customer expectations.Act as the main point of contact with customers regarding DFM, mold concepts, and other technical discussions.Ensure accurate and timely issuance of controlled documents to relevant departments.Drive continuous improvement of production molds to enhance productivity and efficiency.Provide training and support the adoption of new technologies within the team.Foster a positive team culture, strong work ethic, and professional attitude.Maintain discipline and uphold Hi-P culture practices.Ensure compliance with safety standards and proper housekeeping practices.Establish and continuously improve departmental systems and procedures.Ensure effective communication and information flow across all departments.Provide technical support and training to the Engineering team.Serve as the primary contact for customers regarding NPI and tooling status and planning.
Facility and Maintenance Engineer should ensure sustainability of operations and perform proper maintenance of facility and various equipment to meet production targets as well as department’s key performance indicators. Lead team of technicians supporting the operations, improve efficiency of equipment, optimize energy usage, cost improvement, promote safe workplace and ensure factory compliance to all manufacturing standards. Key Responsibilities: 1) In-charge for maintenance of overall facilities and various production equipment. 2) Develop programs and improvement plans to ensure zero major plant interruption. 3) Plan and implement equipment preventive, predictive and corrective maintenance programs. 4) Unsure regular updates of preventive maintenance checksheets and all inspection checksheets. 5) Fulfillment of job orders and request from other departments. 6) Overseeing the implementation of facility expansion, layout, various systems, and quality controls. 7) Preparation of report and other compliance documentations. 8) Train and supervise facility and maintenance technicians to establish a team with good discipline and high morale level. 9) Troubleshooting and repair of facility and production equipment. 10) Determine and control of maintenance spare parts inventories, including oils and other consumables. 11) Implementation of safety standards on plant and ensure legal/regulatory compliance. 12) Ensure regular housekeeping on areas of responsibilities and perform 5S audit within the factory when needed. 13) Establish team with good discipline and high morale level 14) Ensure machines are running smoothly for daily operations 15) Perform other related tasks.
Work Schedule: Monday to SaturdayMust be a Licensed/Registered Electrical Engineer
A Backend Developer responsible for designing, developing, and maintaining the server-side logic, databases, and instrumentation/software integration in industrial, laboratory, or manufacturing systems.Detailed Tasks:Develop, test, and maintain backend applications, APIs, and microservices.Translate business requirements and technical specifications into functional backend systems.Write clean, efficient, and maintainable code following best practices and coding standards.Design and implement reusable components and frameworks.Design and optimize relational and/or NoSQL database structures.Write efficient queries, stored procedures, and data models.Ensure data integrity, consistency, and securityEnsure APIs are well-documented, versioned, and secureWork closely with front-end developers to align API design with user interface needs.Integrate with third-party services and internal systems.Optimize code, queries, and system configurations to improve response times and scalability.Ensure compliance with data protection standards and company security policies.Collaborate with product managers, developers, and business analysts to understand requirements.Develop detailed test plans, test cases, and test scripts based on requirements and acceptance criteria.Perform manual testing by executing test cases to verify functionality.Conduct exploratory testing to identify edge cases or unexpected behaviour.Detect, document, and report defects with clear reproduction steps, severity, and impact.Maintain comprehensive documentation of test cases, results, and defect history.Work closely with development teams to ensure quality at every stage.Promote a quality-first mindset across teams.Responsibilities:Backend development and database management.LabVIEW development and hardware integration.System integration, testing and debugging.Documentation and Collaboration of schemas and backend APIs.Security and Compliance.Training or Certification:MCSA / MCSD CertificationsMicrosoft Certified: .NET DeveloperMicrosoft Certified: Azure Data Engineer AssociateCLAD – Certified LabVIEW Associates DeveloperWork Experience:4 – 6 years of in-depth experience in Software Development working ASP.Net, C++, C#, Java and Python.Database design, query optimization, integration, backups, security3 – 4 experiences in Web/desktop apps, APIs, CI/CD, integration with MySQL, SQL Server or LabVIEWImplementing RESTful APIs and servicesIntegrating with MySQL databases and third-party servicesKnowledge:Programming and development in one or more languages: C#, Java, Python, .Net or similar backend languages and LabVIEW API development and integration.Knowledge in databases like MySQL, SQL Server, PostgreSQL and others.Writing complex SQL queries, stored procedures, triggers, and views.Database design: normalization, indexing, and query optimization.Reporting and analytics: Power BI, Tableau or custom dashboards is an advantage.Integration of the hardware and software.Skills:Developing C# / VB.NET applications (desktop, web, or API)Using ASP.NET Core / .NET 6/7/8 for backend developmentExperience with CI/CD pipelines, Git workflows, and unit testingConnecting LabVIEW to MySQL or .NET applications for logging and analysisUsing LabVIEW for instrumentation, sensors, or industrial automationImplementing automation or test systems using LabVIEW with backend data storage in MySQLAPI protocols: REST and TCP/IP.Troubleshooting, debugging and performance tuning.Work Schedule:At least 8 hours a day, 5 days a week.
sourcing and accreditation of new Vendors and maintaining long-lasting relationships with them;obtains quotes from different suppliers (Direct and Indirect Material);negotiates price, quantity, and delivery schedules with suppliers;works with legal counsel to ensure that all contracts relating to product procurement contain all details of the negotiation;assesses quotations and compiling a detailed assessment of cost breakdowns;generates cost comparisons and contributing to internal supplier selection based on the quotes;provides solutions to improve company spending and outsourcing;organizes bidding for special items and big projects;adheres to all information security and physical security policies and programs;follows health and safety standards; andundertakes any other duties assigned by superiors from time to time.
Educational Background:Bachelor’s degree in Administration, Logistics, Supply chain or related field.Work Experience:Minimum of two (2) years proven experience in sourcing processes.Knowledge:Proficiency in Microsoft Office suiteA thorough understanding of sourcing methodologies.Work Schedule:At least 8 hours a day, 5 days a week. Work Area:Onsite
The BOM Engineer is responsible for creating, reviewing, and maintaining accurate Bill of Materials (BOM) to ensure all product data aligns with engineering specifications and system requirements. The role involves coordinating with cross-functional teams to support new product introduction, manage engineering changes, and resolve BOM discrepancies that may impact production. Additionally, the BOM Engineer ensures data integrity within ERP/MRP systems, supports cost optimization initiatives, and helps prevent material shortages and production delays.Create, review, and maintain accurate Bill of Materials (BOM) for new and existing products.Review engineering drawings, specifications, and technical documents prior to BOM release.Ensure all part numbers, descriptions, quantities, and material specifications are accurate in the system.Update BOMs based on Engineering Change Notices (ECN), product revisions, and design modifications.Ensure timely implementation and proper documentation of BOM revisions and changes.Coordinate with Production, Planning, Purchasing, and Quality teams regarding BOM accuracy and material requirements.Support New Product Introduction (NPI) by preparing and validating BOM data.Monitor BOM discrepancies and resolve material- or system-related issues affecting production.Maintain document control for product structure and BOM changes.Generate reports related to BOM status, revisions, and material usage.Support ERP/MRP system data accuracy (e.g., SAP or similar systems).Assist in material cost analysis and support cost reduction initiatives through material optimization.Work closely with cross-functional teams to prevent material shortages and production delays.Participates in any audit required by the company.Adheres to all information security and physical security policies and programs.Follows health and safety standards.Performs other tasks as may be assigned by the Immediate Superior.Educational Background: Bachelor’s degree in Industrial Engineering, Mechanical Engineering, Electronics Engineering, Electrical Engineering, or other related engineering coursesTraining or Certification: Training in Bill of Materials (BOM) Management and ControlTraining in ERP Systems such as SAP ERP, Oracle ERP, or Microsoft Dynamics 365Knowledge or certification in Engineering Change Management (ECN/ECO Process)Training in Product Data Management (PDM) / Product Lifecycle Management (PLM) SystemsAdvanced training in Microsoft Excel for BOM analysis and reportingCertification in ISO Documentation and Quality Management SystemsTraining in Material Planning and Inventory ControlBasic understanding of PCB / Mechanical Drawing Interpretation (if manufacturing-related)Training in Root Cause Analysis and Problem-Solving ToolsCertification in Lean Manufacturing or Six Sigma is an advantageKnowledge: Understanding of Bill of Materials structure and product configurationKnowledge of ERP / MRP systems (such as SAP, Oracle ERP, or similar systems)Familiarity with engineering drawings and technical documentsKnowledge of material coding and part numbering systemsUnderstanding of Engineering Change Management (ECN/ECR)Basic manufacturing process knowledgeKnowledge of inventory and production planning principles
Work Area: OnsiteWork Schedule: At least 8 hours a day, 5 days a week.
conducts regular meetings with clients to ensure clarification and meet specific requirements in a timely manner;delegates tasks to team members according to their individual skill sets, experience and abilities to ensure efficient completion of the project;maintains budgets and make adjustments according to needs as they arise; documents and reports project progress to stakeholders and clients.assists with proof-of-concept testing before the prototype stage;analyzes prototypes and finished products for functionality;reviews existing designs, supporting the enhancement or revision of products;creates technical drawings using CAD software and outline product specifications;verifies the accuracy of tooling design and work instructions;documents the entire development and design process;participates in any audit required by the company;adheres to all information security and physical security policies and programs; follows health and safety standards; and performs other tasks as may be assigned by the Immediate Superior.
Molding Technician responsible for operating and calibrating machinery, adhering to product guidelines, conducting quality inspections on finished products, lifting heavy materials, and training new workforce members.responsible for the effective and efficient execution of productionplans according to established operating procedures on machines and manage process area in line with operational objectives and standards;responds and performs high risk task to be given by superior in-charge;conducts daily mold and machine check sheet update;handles and operates injection machine;performs daily Quality and Machine troubleshooting to achieve the productivity & efficiency target of all machine;performs reporting for any kind of mold and machine trouble;performs machine, tools/cutter and jig set-up;operate machines during injection;accomplishes all required production reports right after each jobs; andhelps the company to attain its Vision and Mission by exercising the company Quality Policy;follows health and safety standards; andadherence to all information security and physical security policies and programs; and performs other tasks as assigned.Work Experience:At least three (3) years’ experience as a Molding Technician.Knowledge:Knowledge in Handling Sumitomo and Zhafir machine.Work Schedule:Shifting work schedule: at least 8 hours a day, 6 days a week.
SMT (Surface Mount Technology) Technician is responsible for machine troubleshooting and repair of barcode laser marking, solder paste printer, SMT chip mounter, reflow oven, magazine loader/unloader, flipper, linking conveyor, component preparation machine, stencil and PCB washer and other frontend assembly machine.responsible on ensuring that all front end assembly machine are continuously running to meet production demand and target yield;supports continuous improvement to meet target FPY, throughput and scrap reduction;supports cross functional team such as QE, TE, Planner, Production to achieve Hi-P KPI while maintaining world class quality product;supports Equipment Engineer on creating machine operation and preventive maintenance work instruction;supports on machine preventive maintenance, performance improvement and spare parts requisition;supports machine vendor when doing repair, upgrade or optimization;supports Process Engineer to establish machine parameter settings as a result of DOE and document it for process control and quality improvement;conducts an orientation or refresher of criteria/specifications to all SMT operators and/ or associates that need to know and are involved in the process;generates engineering report regarding problem encounter to machine or PCB assembly;supports Equipment Engineer on machine buy off and evaluation;supports Process Engineer or Process Technician on evaluation/buy-off of jigs, fixtures, indirect materials, consumables and others;conducts daily checking of machine performance and yield;performs first level of root cause analysis to improve FPY;supports the NPI or ECN for data gathering on the machine;adheres to all information security and physical security policies and programs; follows health and safety standards; andperforms other tasks as assigned by the immediate superior.
Schedule: 6 days a week, shifting scheduleAt least High School graduate / Technical/Vocational course
Accounting Supervisor - GL is responsible for managing the site GL account functions. The duties includes handling tax related matters, month end closing activities, perform month end balance sheet review and analysis, dealing internally with different local authorities requirement and handling with external and internal auditors.To perform after month end Balance Sheet review, analysis and clearingPrepare necessary month end journal entries such as expenses accrual, prepayment, payroll related postings and etc..Dealing with BIR and internally in relate to all tax related matters.Managing 1 staff and provide necessary guidance if issue arise.To liaise with external or internal auditors.To perform analysis on expenses variation to report to Finance Manager for Management Reporting purpose.Dealing internally in respect to any ad hoc requirement from local authorities.Able to give clear feedback or information when queries raised from internal or external.
Educational Background: Bachelors’ degree or above major in Finance/Accounting Training or Certification: Additional certification (e.g. CPA) is a plus Work Experience: At least five to seven (5-7) years of work experience in related fieldWith audit background will be an added point Knowledge: SAP ERP
